Water procedures are a mandatory daily ritual of a person. But what about the owners of small apartments, where the size of the bathroom does not allow you to place all the desired plumbing? A compact shower stall is a modern alternative to a traditional bathtub. A variety of materials for its arrangement allows you to turn it into a stylish shower. Do you agree?
It does not require much space, saves water and time allotted for hygiene procedures. And most importantly - such a design is quite affordable to perform yourself, according to your own design and measurements. Let's take a closer look at how a shower cabin is made of tiles in three versions - with a finished or home-made tray, as well as without it.
We will talk about how to independently build a shower from a tile, what materials and tools will be required for this. The article also contains expert advice and the main nuances that are worth paying attention to during construction. And the videos posted in the material clearly demonstrate the arrangement of the tray from the tiles for the shower.
Pros and Cons of Tile Shower
Although today in plumbing stores you can choose the atmosphere for any interior style, home-made showers do not lose popularity. The main reasons are the volumetric dimensions and the impressive cost of really high-quality factory products.
Budget options are most often made of inexpensive plastic and with cheap components, which soon manifest themselves in all their glory in the form of frequent breakdowns. Some of them can be eliminated with your own hands, and to repair individual elements of the shower cabin you have to turn to the masters.
The color design of plastic booths is rather meager - most often they are available in white or silver, while ceramic elements will make it possible to design a shower corner in the same style as a bathroom
Additionally, many booths are equipped with all kinds of electronics - from a radio point to a steam generator, lighting effects and a Sharko shower, the need for which is very doubtful, but they increase the cost of plumbing significantly.
In addition, factory products are manufactured according to the standard size range, which does not always fit into small-sized rooms in country houses or old buildings, where every centimeter counts.
Factory cabins are demanding on the evenness of floor and wall surfaces, and in the manufacture of a home-made shower, these errors can be eliminated during the construction process.
Therefore, a homemade shower made of tiles has several advantages:
- Reliability and simplicity - the design with ceramic lining is much stronger than the plastic walls of standard shower cabins, so it will last a long time.
- The ability to create an original design - In addition to the form for the booth itself, you can experiment with its design, because the range of mosaics, tiles and porcelain stoneware is very diverse.
- Safety and environmental friendliness - ceramics do not conduct electricity and do not emit unpleasant odors (unlike some types of plastic).
- Easy care - it’s easy to take care of the tile, it does not turn yellow, is undemanding to detergents and is easily cleaned of limescale after hard water and soapy drips.
There are not so many shortcomings in the tiled booth (of course, if its installation is carried out in accordance with all the rules and in compliance with the bias). Basically, poor sound insulation is noted, which is solved by laying an additional layer under the screed or installing a finished pallet.
It also seems to many that taking a shower while standing on a cold tile is not very comfortable. But in fact, ceramics quickly heat up under a warm stream, and even if desired, a “warm floor” system and an additional heat-insulating layer can be installed under such a cladding.
Homemade cab options
If you decide to independently begin to design a shower zone in the bathroom, first decide on the installation location of the future booth and its design.
The complexity of the preparatory work depends on the choice of design - the need for floor leveling, installation of hydro-, sound- and heat insulation, installation of a ladder and pipe layout
Depending on the height of the ceiling, the entrance to the sewer, the size of the free area and your building skills, three options are possible: with a purchased pallet, gangway or home-made pedestal.
Option # 1 - a shower with a finished pan
If there is enough space in the bathroom, and the main goal of arranging a home-made cabin is a non-standard design, it is quite possible to ease your task and buy a ready-made pallet.
Moreover, in the plumbing shop you can choose the option for any design and budget - it can be either a familiar snow-white pedestal made of acrylic, or a product made of beautiful artificial stone or reliable cast iron.
In order for the structure to be stable and leak-free, it may be necessary to align the wall joint at right angles and the floor in level
In addition to the pallet itself, for installation you will need:
- Flexible drain hose.
- Corrugation and siphon.
- Foam concrete.
- Tile adhesive.
- Silicone sealant with a gun.
- Tape measure, level and marking pencil.
- Saw, wooden / rubber mallet.
- Tray and trowel.
The installation of the pallet is carried out on a specially erected foundation, under which communications are hidden. First you need to make a markup: lay the pallet in the place chosen for installation and circle the contours with a pencil.
Then saw four supports from foam concrete that will support the base of the future cabin, and check the level evenness (if necessary, the blocks are easily cut).
The supports for the pallet are fixed to ordinary tile glue, but if the design includes legs, adjustable in height, the installation process will be much simpler
Now you need to attach the drain. To do this, it is necessary to return the pallet to the supports and outline the location of the siphon on the floor through the drain hole. Remove the sump again and attach the siphon to the drain pipe so that it matches the marking.
If the entrance to the sewer is located far from the drain of the future cab, use a corrugation or pipe of a suitable diameter, carefully sealing the joints
Then the foundation is erected from the blocks of foam concrete cut to the height of the supports and mounted on tile adhesive. When the base is prepared, its upper surface is coated with the same tile glue, a pallet is installed on top and adjusted with a wooden or rubber hammer according to the level.
At the final stage, it is necessary to ensure the tightness of the structure. To do this, wipe the edges of the pallet with a clean cloth, degrease and walk through the joints with silicone sealant. It remains to install the siphon in the pallet and to cover the foam concrete foundation with tiles.
Do you have an acrylic, cast-iron or marble pallet? On our website there is an article with step-by-step instructions for installing pallets of various materials. We recommend that you familiarize yourself with them.
Option # 2 - booth design with a ladder
A spectacular solution that looks attractive in photographs of modern interiors is a one-level cabin without podiums and drops.
Such a shower enclosure is ideal for small bathrooms, especially if it is equipped with transparent glass doors, and the walls and floor are decorated with the same materials or in a related color scheme with basic finishes. As a result, the design is airy and stylish.
To increase the space in a small room, the booth can be left without side partitions, replacing them with curtains or doors that fold into a compact "accordion"
To do this, you need to equip the corner not with a pallet, but with a drain ladder. But to plan such a construction is best at the repair stage, because you will have to raise the floor by at least 15 cm to hide communications under the concrete layer.
The second option is to drill a hole in the screed for drainage and a groove for supplying to the sewer pipe. But this is in case the thickness of the “pie” on the floor allows masking communications, because it is impossible to hollow the floor slabs.
When installing a drain, it is important to provide for the possibility of repair and replacement, so if you install a siphon, always leave the inspection passage as well, but the ladder design is more reliable, therefore it allows the use of a monolithic screed
Important recommendations for arranging a drain ladder:
- First you need to do the marking for the future booth, determine the place for the ladder bowl, where water will flow from the shower.
- Then, to the place of shower drain, you need to bring a pipe entering the sewer. Here it is desirable to provide a slope of 3% (although for a linear ladder it is possible 1-2%) and an acceptable angle of rotation at the entrance to the sewer within 30-45 °. Under these conditions, it will be possible to clean the clogged pipe with an ordinary plumbing cable.
- After measurements, the ladder is installed on the supports of the required height and attached to the pipe.
- When all communications are installed and connected, concrete screeding can be performed. But here it is important to make a bevel of 4-5 cm per meter of length in the direction of the drain bowl, so that the water does not stagnate on the floor, but goes into the drain.
At the final stage, you need to make water inlet and close the booth with glass or plastic doors, which can be bought together with fixtures in a plumbing store or made independently.
In the economy version, for example, when organizing a shower in a country house, you can get by with curtains made of polyethylene or waterproof fabric.
Option # 3 - a shower room with a homemade tray
Instead of a factory podium, you can make a solid base for a booth on a brick or concrete foundation, which will only be faced with ceramic tiles or mosaics.
The dimensions of such a shower completely depend on your preferences - it can be either a modest corner or a real mini-pool with high sides
But such a capital decision can be very difficult to put into practice, because in addition to the pedestal itself, high-quality waterproofing will be needed, and the plumbing should be considered in detail.
Therefore, we consider in more detail the main stages of such construction, so that it is easier to assess the front of the upcoming work and our own forces.
Making a booth from scratch: step-by-step instructions
First, decide on the shape of the future booth and make markings for it on the floor. The easiest way is to make a square or rectangular shower in a corner or a niche, but if you wish, you can erect a trapezoidal or semicircular design.
But although much depends on the layout and the availability of free space in the bathroom, keep in mind that the minimum dimensions of a comfortable cabin are 90 * 90 cm.
Step # 1 - selecting materials and tools
To equip the booth, you will need the usual set of tools, which will probably be found in the stocks of the home master: level, pencil and tape measure, trowel for mortar and glue, trowels for grouting, roller and brush.
To mix the solutions, it would be nice to stock up with a construction mixer, otherwise you will have to prepare the mixture manually.
From the materials you need to prepare:
- Moisture-resistant single brick (you can use silicate, but with the obligatory treatment with hydrophobic agents).
- Reinforcement mesh with cells 10 * 10 cm.
- Mix for a coupler M-200.
- Waterproofing mastics or rolled materials.
- Insulation.
- Tile or mosaic with crosses for layout.
- Tile adhesive, grout and acrylic sealant.
It is also necessary to purchase plumbing parts in advance for arranging the drain - pipes, a ladder or a siphon with all the necessary connections.
Step # 2 - bring the pipes and build the foundation
So, the place is chosen, you can begin construction. First you need to remove the old coating from the floor and walls.
If the floor is fairly even, you can immediately treat it with waterproofing material, but if there are significant differences, you should first make a rough screed (for heat and noise insulation, you can put glass wool, polystyrene foam or mineral fiber).
Install communications: from the sewage system, it is necessary to lead the pipe to the installation site of the siphon or ladder with a slope of at least 1%, and from the water supply system - to drill a hot and cold water supply in the wall
The issue of connecting to the sewerage and water supply should be treated very carefully. All joints must be sealed and treated with sealant. If you have never done such a job, we recommend that you look at the detailed briefing on connecting the shower to the communications.
After drying, insulation is applied to the surface of the floor and wall, for example, bitumen mastic or liquid rubber. You can use roll materials, but the ideal option is polymerizable impregnation (water glass), which are used to isolate pools.
When solidified, they form a water-tight coating that will reliably protect against leaks.
Pipes should also be treated, leaving only valves and outlets open.
Waterproofing is an obligatory step in the construction of a shower room with your own hands, because it can save you from the problem of flooding your neighbors, fungus and wear of building materials in contact with water
For the foundation, you can take moisture-proof red brick, which is laid on tile adhesive for masonry around the perimeter of the future booth, forming the sides. Then a ladder with a water trap or a standard siphon is installed and attached to the sewer pipe.
After this, the floor is laid with brick or poured with a self-leveling mixture (3-5 cm thick) using a reinforcing mesh.
When arranging the finishing screed, it is important not to forget to make a bias towards the drain, otherwise the water will constantly stagnate on the shower floor
It remains to thoroughly wipe all joints and cracks with a solution of sand and cement, dry and coat again with waterproofing without affecting the siphon.
We have another article on our site in which we examined in more detail the process of self-production of a pallet of tiles, providing the material with step-by-step photos.
Step # 3 - assemble the frame and lay the tiles
If you want to arrange a full booth, and not a shower corner, you need to build partitions. Depending on the location, on one or two sides the cabin is already adjacent to the room wall.
The missing partitions can be made of moisture-proof plywood or drywall, followed by facing with the same tiles or mosaics. To do this, you need to build a frame from a metal profile, sheathe it with gypsum board, smooth the joints with putty and prime the surface.
If the drywall wall does not inspire you, you can erect a partition made of transparent or frosted glass (triplex is best), glass blocks, plastic panels
In order to finish beautifully, it is important to smooth the surface of the frame, especially if you want to clad it with a mosaic that is fastidious to the quality of the base.
To do this, you can use plaster, followed by treatment with moisture-resistant impregnation or gypsum mixture.
If you have chosen a complex form for a pallet, where there are smooth lines, curves or a large number of corners, it is better to choose a sheet mosaic for facing - it is easier to work with it than with large tiles that need to be carefully measured and cut
After leveling, attach the cladding to the tile adhesive and treat the joints with a moisture-proof grout. When the solution hardens, treat the joints of the tiles with the walls of the shower with sealant.
The better the laying will be done and the less the tile spacing, the longer the decorative coating will last in humid conditions.
Step # 4 - install the doors for the cabin
So that during hygiene procedures water is not sprayed throughout the bathroom, it is advisable to protect the shower from all sides. The easiest option is to arrange a screen made of plastic or waterproof curtains.
But such a solution is more suitable for a shower in the country, but a room in an apartment is unlikely to decorate. Therefore, you can buy ready-made sliding, folding or swing doors or make them yourself from drywall or plywood.
Hinged doors are the simplest solution for arranging a cabin from tiles, and although their design is not leakproof, it protects them from splashing water throughout the room
But still, the best option (both in design and moisture resistance level) for arranging partitions of a makeshift cabin is sliding polycarbonate or glass doors with a thickness of at least 6 mm.
You can cut and process the ends of the workpieces in a glass workshop, and install using ready-made canopies that are attached to both the ceiling and walls.
Building and Design Tips
To create your own unique design, you can combine various materials, not forgetting the practicality and safety of the future shower. For example, for the floor, it is desirable to choose a small embossed tile or mosaic - on a rough surface with frequent seams there is less chance of slipping.
As a finishing material for the pallet, you can use multi-colored pebbles or other decor, filling the finish layer with transparent sealant.
If you wish, you can equip a homemade structure with hydromassage and other functions from the arsenal of the factory hydrobox, but for this you will have to install additional pipes and make special releases
A few important nuances:
- To prevent the water in the pipes from building up, an important rule must be observed: the entrance to the sewer must always be below the floor level. The height of the pallet with an integrated siphon or drain ladder depends on this.
- Before installing the drainage system, pay attention to the capacity of the ladder: the larger it is, the faster the water will leave the pan. In some cases, for example, for a booth with a rain shower function, a standard ladder may not cope with the flow of water.
- It is best to lay a whole tile or mosaic sheets on a pallet. To do this, at the stage of marking the booth, you can make a dry layout. If you can not do without undercuts, install end caps on the saw cut.
Creating the design of your future cabin, think about comfortable little things.
At the construction stage, it is easy to provide various shelves or niches to accommodate all kinds of shampoos, gels and other hygiene items, or to build a small chair, tiled.
For a more complete picture of the various nuances and stages of the work on arranging home-made booths, we suggest studying several videos with the advice of masters.
How to mount a linear drain for a shower enclosure:
How to make a booth with a tile tray and underfloor heating:
The initial stage of the construction of the pallet - calculation of height, rough screed:
Installation of a ladder and floor insulation in a shower booth:
How to make a floor screed for a pallet:
The construction of a home-made shower cabin with tile or mosaic facing allows you to realize the most creative design ideas. And if you perform all the work efficiently, not forgetting the slopes and waterproofing of the surfaces, such a shower will last much longer than plastic booths.
But if you are not confident in your construction skills, you can always connect professional builders or plumbers to the work.
Do you like tile showers and want to build one for yourself? If you still have or have questions after reading our instructions, ask them in the box below.
Or do you want to supplement our material with practical recommendations for laying tiles, connecting to a water supply / sewage system? Maybe you just completed the construction of a shower stall? Write your comments and tips, add photos of your own made booth - your experience will inspire many newcomers to this business.