The desire of developers of new types of plumbing to minimize its weight is fully justified by the desire to facilitate installation and reduce the load on the base. Specialized markets offer a wide range of products, the installation of which can easily be done independently.
However, lightness deprived the tank of an important quality - stability. To avoid overturning, a bath frame that can be built with your own hands will help.
We will tell you in what cases you can’t do without additional support, indicate suitable materials for assembling the frame, and give tips on choosing the type of construction. Step-by-step instructions with photo accompaniment will help to make a reliable frame for any bath.
Prerequisites for the device frame
Frames are constructions that provide stability to light types of plumbing. On an industrial scale, they are purposefully produced for the installation of bathtubs made of acrylic, multilayer fiberglass, and kvar; if necessary, they are independently arranged for bowls made of steel alloys and cast iron.
Structurally, the frame is a system of one or two horizontal strapping and vertical supports. Factory-made products are usually clearly designed for average human weight and the mass of water collected in the tank.
However, many of the owners of light fixtures feel insecure, plunging and leaving the bath, especially since the real weight of users is often far from the average data.
Image Gallery
Photo from
Making a frame for installing a bath
The method of increasing the reference area
Improving bath comfort
Arrangement of space in the bathroom
Base device for further decoration
Masking and protecting equipment
Wireframe Screen Features
Decorative frame for acrylic model
In bathing tanks of traditional dimensions, from 150 to 170 cm long, from 140 to 200 liters are placed. We equate the weight of one liter to a kilogram, add the weight of the body immersed in the bath and as a result we get a load equal to about 250-300 kg.
The total weight, of course, solidly loads the bowl, but does not give complete confidence in the unwaveringness, especially if the bathtub has a fantasy configuration. The supporting legs, on which all considerable weight is distributed, are doubtful.
Their plan area is approximately 10 cm², which makes us think about strengthening and increasing the reference area.
Frames for bowls of a non-standard configuration perform several functions at the same time: complement the design of sanitary ware, provide stability of the bowl and comfort during the reception of procedures
In addition to the desire to secure the reception of procedures by ensuring stability for the frame device, there are a number of good reasons. It is built if they plan to arrange a bath screen that closes communications and fittings. In this case, the weight of the bowl does not matter at all, the frame under the screen is mounted around the cast-iron products.
Arrange a frame if there is a need to raise the height of the bath to form a normal drain of water or to arrange a podium around a luxurious jacuzzi.
Naturally, to solve various problems, structures are built according to different schemes, but the principle and technology are the same. There are no particular differences in the materials used.
In some cases, a frame device is necessary to raise the bath relative to the floor level and ensure normal drainage of water from the plumbing to the sewer
Materials for homemade frames
Choosing material for the construction of the planned structure, you should focus on your own skills, knowledge in the field of construction and opportunities. The bearing capacity of the selected option and the resistance to the effects of a humid environment traditional for bathrooms are also important.
In the construction of homemade frames used:
- Lumber. Basically a wooden block with face sizes from 40 to 60 mm. Sawing and joining the beam into the supporting structure is quick, fastening and the formation of nodes does not cause difficulties even for an inexperienced master.
- Profiled pipes. Strength and bearing capacity of rolled metal of square or rectangular cross-section allows to significantly reduce the dimensions of the supporting structure, it is elegant and "neater" wooden. However, the manufacture of metal is available to the contractor with the skills of a welder.
- Metal profile for GVL. It is used mainly not for reinforcing frames, but to create the basis for a decorative screen. To work with the profile, you need the usual tools that each owner has, experience in such work is optional.
Sawn timber is the least suitable for working in a bathroom, but the frame is assembled from them without problems.
Errors and shortcomings are easier to redo than flaws in metal structures, and it’s not so painful to hit the pocket if it is necessary to purchase material for alteration.
Image Gallery
Photo from
Timber support structure
Welded metal
Aluminum frame
Steel profile construction
It is important to initially remember about the characteristic vagaries of wood, before starting work, treat the bar with antiseptic impregnation. In the assembly, it is desirable to use galvanized hardware and angles, if there is no experience in the construction of connecting nodes with cuts.
Profiled metal is also not very resistant to moisture. For the device of the frame, it is better to buy it in galvanized form or to conduct galvanization after purchase.
If the metal structure is arranged without sheathing with decorative panels, it is better to cover profiled pipes with powder paint. The result looks decent, and protects from rust.
The frame of the metal profile used for attaching drywall is resistant to moisture, does not need additional treatment with a water-repellent composition
The aluminum profile or its analogue from galvanized steel tape is not “afraid” of water at all. A gypsum-plated frame made of such material will last for decades.
True, you should not rely especially on the fact that he will be able to compensate for the swaying of the acrylic bath, although it will be carefully prevented, but to the extent possible.
The profile is simple and easy to use, without any problems it is cut and connected. On gypsum board attached to an aluminum or steel frame, ceramic tiles, mosaics, and plastic panels are perfectly glued. If preference is given to steel products, then for installation in the bathroom you need to buy a profile with galvanization.
It happens that the frame device uses two or three materials in a complex. For example, the strapping is performed from a bar, and the racks from a metal pipe. If necessary, raise the bath above the floor under the bowl put brick supports, foam concrete blocks or a large beam.
If several problems are solved during the construction of the frame, several types of building materials are used. It should be remembered that direct contact of metal, brick, wood should be excluded by laying a waterproofing material between them
Dependence of the complexity of the structure on the form
It is clear that the more complex the shape of the bowl in terms of, the more work the independent master will have.
According to the degree of complexity, the arrangement methods can be conditionally divided into the following options:
- Plain rectangle. Its construction will not cause difficulties, especially if the frame is installed in a niche or in a corner formed by two adjacent walls.
- Triangle with curly outer side. Similar designs suit for corner baths. The sides converging at right angles are usually located in the corner of the room, the frame is constructed on the outside, it includes several frames connected to each other.
- Oval. It is equipped along the contour by installing a large number of frames or broken strapping. Although there is a simpler method.
To facilitate efforts in the construction of oval and fantasy-shaped bathtubs, a rectangular structure is constructed with a GVL lining.
In the horizontally laid upper panel of the casing, a hole is cut out under the bowl so that its sides completely rest on the frame.
Image Gallery
Photo from
Arrangement of an oval bath
The specifics of the construction of the frame
Bowl hole forming
Panel hole pattern
Most homemade products do not involve repeated assembly / disassembly. They are arranged in a non-separable form, although sometimes the possibility of dismantling with subsequent construction in a new place would be very useful for lovers of frequent moving.
Easily disassembled and assembled many times the frames supplied in the complete set for acrylic bathtubs. They include, as standard, a welded frame and adjustable supports in the form of steel threaded rods with plastic nozzles. Attached are fasteners and instructions with a detailed step-by-step description of the actions.
Methods of constructing supporting structures
Any work should be preceded by a project, whether it is a large-scale plan with the most accurate calculations or a diagram with dimensions and rough drafts. It’s worthwhile to think over a design option and methods of its assembly in advance, take the exact dimensions and draw a plan at least by hand.
It should be remembered that regardless of the stage of repair, the sections of walls and floor that the stationary frame will close must be repaired, the surfaces are leveled and treated with waterproofing.
Before the support frame is installed, the bowl itself is installed and aligned to the horizon. It is desirable that the plumbing be connected to the communications, and the position of the equipment is precisely defined in the jacuzzi
Immediately it is worth considering where the inspection hatches will be located to control technical systems and components. It should be possible to remove equipment and fittings for repair or replacement.
If you are to build a frame around the already installed old plumbing, you need to check the connection points to the sewer and water supply. If possible, it is necessary to repair the floor under the bowl, replace the doubtful sections of pipes and fittings.
Assembly of the finished support kit
First, we will figure out how to install an acrylic bathtub on a prefabricated assembly. Work is carried out in a strictly defined sequence.
First, a frame is attached to the bowl turned upside down, then they are turned over together, put in place, leveled and fixed.
Image Gallery
Photo from
Preparing a bath for attaching a frame
Fitting a welded frame to a mounting location
Preparation of fasteners
Drilling holes for installing studs
After a successful preparatory stage, we proceed to the assembly of the frame, clearly following the instructions of the plumbing manufacturer.
Depending on the brand and configuration of the product, there may be some deviations in the production steps.
Image Gallery
Photo from
Step 5: To fix the position of the frame, tighten the nuts on the threads of long vertical posts
Step 6: Focusing on the readings of the building level laid in different directions on the welded frame, tighten the nuts
Step 7: Carefully level the frame by level, if necessary, change the position of the nuts. Check the strength of the mounting hardware
Step 8: We collect the bathtub legs from short hairpins and plastic supports that increase the area of support
Step 9: Carefully verify the height of all the legs used in the installation, screw the holding bushings onto them
Step 10: We install the legs with the bushings, fix them to the frame
Step 11: If you plan to install the screen included in the package, fasten the clamps intended for fixing the screen to the sides of the bowl
Step 12: Turn the bath over, check the horizontality of the bowl with the building level, if necessary, adjust by tightening the nuts or bushings
Tighten the nuts to hold the uprights
Leveling Long Stands
Checking the strength and horizontal installation
Assembling bath legs with plastic supports
Height adjustment and installation of bushings
Attaching the bathtub legs to the welded frame
Installing and fixing the screen clip
Putting the bath in working position
The frame is assembled and fixed together with a bowl resting on it. It remains only to connect the bath to the communications, install a siphon and hang the screen.
If there is no intention to arrange an additional supporting structure, then the actions are performed in the following order.
Image Gallery
Photo from
Fitting the screen to the installation site
Magnetic devices for fixing the screen
Screen flip on top edge
Sealing the joint between the wall and the bowl
If it is decided to make an additional reinforcing frame, around the bowl around the perimeter arrange a frame of bar or profile.
Image Gallery
Photo from
The device additional frame for decoration
Corner bowl frame device
The specifics of the assembly of a curved design
The device design of the profile
Let us examine an example of the construction of a frame for a cast-iron bathtub, the two sides of which are adjacent to adjacent walls. In order to prevent the water spraying from the shower head from pouring water onto the floor during the procedures, fill the gap between the sides and walls with mounting foam or treat it with plumbing sealant.
For convenience, we note the projection of the bowl on the floor and on the walls, taking into account the thickness of the finish, in this case the ceramic tile and the glue necessary for fixing it.
Image Gallery
Photo from
Preparing for a metal frame device
Trying on materials and finishes
Marking trim layers and frame racks
Installing the lower frame trim
Installation of the upper harness and supports
Mounting and securing row supports
Gypsum plasterboard sheathing
Homemade Tile Finishing
As a result, we got a box mounted on a metal frame, which remains to be pasted over with tiles, clinker bricks, porcelain stoneware, plastic panels or mosaics. In the place where the plumbers connected to the communications, they organized a hatch, which is required for monitoring and repair.
Timber frame construction
The algorithm for constructing a frame of timber is not much different from the above method.
Image Gallery
Photo from
The principle of the device frame of the timber
Supporting the sides of the bath tub
Fixing the lower harness to the base
Work is carried out in the following order:
- Markup. It is carried out using the building level and plumb. The lines of the future frame are marked taking into account the finish.
- Bottom harness. According to the outlined perimeter, we saw and connect a beam, the inner edge of which "2–3 cm" comes under the sides of the bowl. Do not forget that the bath should be based on the design.
- Fixing the lower harness to the floor. It is produced by fasteners corresponding to the floor material.
- Top Harness Assembly. The dimensions of this part of the structure must exactly repeat the dimensions of the lower trim.
- Installation of twin angular supports. In the corners we install a support for each of the adjacent walls of the frame. We connect them with the lower and upper binding corners.
- Installation of ordinary supports. It is made after about 50 cm, but in general the step of arrangement of ordinary racks depends on the upcoming load and the location of the hatches.
- Installing sheathing sheets. Drywall or plywood panels are installed before installation so that between them there is a gap of 3 mm, necessary for linear expansion. Used fasteners that match the type of skin material.
The work order given by us can have all kinds of variations. The assembly order of the frame is also optional. For bowls with different heights, the horizontal strands can be three or more.
It is important that the do-it-yourself design reliably holds the weight of the bath with its owner, does not swing and is firmly attached to the base or to the walls.
A video demonstrating the assembly process of an acrylic bath:
Features of the manufacture of welded metal structures:
Video guide to installing the bath and assembling the frame from a metal profile:
The frame device options we have given as an example will help you build a reliable structure with your own hands. The frame executed according to the rules will last a long time. The result of personal efforts can boast to friends and neighbors.
Have experience building a bathtub frame? Please tell readers about your method of assembling the support structure. Comment on the publication, participate in discussions and add photos of your homemade products. The feedback block is located below.